四種常見通風管道的歷史的起源知識

發布人：http://www.ryublack.com   發布時間：2017-11-23 16:41:08

一種：鍍鋅鋼板風管
The first type: galvanized steel duct
市場上使用普及的通風管道，使用鍍鋅薄鋼板加工制作而成，適合濕度小的一般性空氣的輸送，無保溫和消聲功能，需另加消聲器，重量重，制作安裝周期長。
The most popular ventilation pipe used in the market is made of galvanized steel sheet, which is suitable for the transportation of general air with little humidity, without heat preservation and noise elimination. It needs additional muffler, heavy weight, long production and installation cycle.
無機玻璃鋼風管
Inorganic glass fibre reinforced plastic air duct
起源于上個世紀八十年代的，使用玻璃纖維增強氯氧鎂水泥加工制作，不燃A級、耐腐蝕、硬度大但脆弱，受自重影響容易變形斷裂，無保溫和消聲功能，需加裝消聲器，重量重，制作安裝周期長。
Originated in the last century in 80s Chinese, using glass fiber reinforced magnesium oxychloride cement manufacture, burning a, corrosion resistance, high hardness but fragile, easy to influence by gravity deformation and fracture, without insulation and noise elimination function, need to install muffler, weight, installation of the production cycle is long.
第二種：玻鎂風管
Second types: glass magnesium duct
起源于本世紀初的，采用無機玻璃鋼風管材料復合聚氯乙烯泡沫板三明治的方式制作成板材，便于運輸和加工，重量較輕，外層無機板可達不燃A級，內層保溫材料阻燃。需加裝消聲器，強度差，漏風量大。
Originated from the beginning of this century, China made use of inorganic glass fiber reinforced plastic wind pipe material composite PVC foam board sandwich method to make board, easy to transport and processing, lighter weight, outer layer inorganic plate can be non combustible grade A, inner insulation material flame retardant. The muffler needs to be installed with poor strength and large air leakage.

復合玻纖板風管
Composite glass fiber board air duct
起源于上個世紀八十年代的美國，以離心玻纖板為基材，內敷玻璃絲布或鋁箔，外覆防潮鋁箔布(進口板材為內涂熱敏黑色丙烯酸聚合物，外層為稀紋布/鋁箔/牛皮紙)，用防火粘接劑復合干燥后，再經切割、開槽、粘結加固等工藝而制成，根據風管斷面尺寸、風壓大小再采用適當?shù)募庸檀胧?。防火性能不燃A級，保溫性能好，重量輕，安裝簡便，消聲性能優越，無須加裝消聲器。弊病不能在室外及潮濕地方使用。
Originated in the last century in the United States in 80s, by centrifugal glass fiber board as base material, apply glass cloth or aluminum foil covered with moisture-proof foil cloth (imported sheet coated with thermal black acrylic polymer, the outer layer is thin cloth / aluminum foil / kraft paper), fireproof adhesive composite after drying, after cutting, notching, bond reinforcement technology made according to the wind pipe section size, the size of the wind pressure and reinforced by appropriate measures. The fireproof performance is grade A, the insulation performance is good, the weight is light, the installation is simple, the noise elimination performance is superior, and the muffler is not needed. The disease cannot be used outdoors or in wet places.
第三種：酚醛風管
Third: phenolic air duct
起源于本世紀初的，以酚醛泡沫為基材，內外覆壓花鋁皮。保溫性能優越，防火性能優越在不燃A級--難燃B1級之間，重量輕易安裝。需加裝消聲器，弊病是長期釋放甲醛及苯等有害氣體。
Originated from China in the beginning of this century, phenolic foam was used as the base material, and embossed aluminum coating was coated inside and outside. Excellent insulation performance, excellent fire resistance in the non flammable class a refractory B1 class, easy to install weight. It is necessary to install muffler, which is the long-term release of harmful gases such as formaldehyde and benzene.
聚氨酯風管
Polyurethane air duct
起源于上個世紀70年代末期的歐洲，以聚氨酯泡沫為基材，內外覆壓花鋁皮。保溫性能優越，防火性能優越，重量輕易安裝。需加裝消聲器，弊病是防火性能只能達到B1級。
Originated from Europe in the late 70s of the last century, polyurethane foam was used as the base material, and embossed aluminum coating was coated inside and outside. Excellent insulation performance, superior fire resistance, easy installation of weight. Need to install muffler, the disadvantage is that fire performance can only reach B1 level.
第四種：纖維織物空氣分布器（布風管）
Fourth: fiber fabric air distributor (air distributor)
源于1973年丹麥，一個項目應用于哥本哈根皇冠屠宰場，由于具有送風柔和、易于清洗、安裝方便等特點，70年代后期開始向食品行業以外的領域拓展，目前已成為在國際市場上占有相當大份額的一種通風系統模式。
From Denmark in 1973, the first project in Copenhagen crown slaughterhouse, because of the characteristics of the air soft, easy cleaning, convenient installation, late 70s began to expand beyond the realm of the food industry, has become a model of ventilation system occupies a large share in the international market.
空氣分布器具有面式出風，風量大，送風均勻，無吹風感，無需保溫杜絕冷凝；易清潔維護；美觀高檔、色彩多樣；重量輕金屬風管的1%，屋頂負重可忽略不計；安裝簡單，工程周期縮短傳統風管的1/10等優點,防火性能可達到A級和B1級。無須加裝消聲器、風口、風閥、保溫材料、靜壓箱。弊病是必須明裝，實體吊頂內無法使用。
The air distributor has to face the wind, large volume, uniform air supply, no sense of hair, without insulation prevent condensation; easy cleaning and maintenance; beautiful high-grade, colorful; light weight to the metal duct 1%, the roof load can be ignored; the installation is simple, construction period is shortened to traditional duct 1/10 etc. the advantages, fire performance can reach grade A and B1. No muffler, air outlet, air valve, thermal insulation material and static pressure box are needed. The disadvantage is that it must be installed and can not be used in the solid ceiling.
2002年雀巢雙城項目中一次采用空氣分布器，在市場得到了高度關注。2006年FAERY法瑞（）在北京中關村投資創辦北京法布瑞克技術有限公司，并成為煙草、兵器、中糧集團、中石油、華潤集團、北汽集團等央企及雀巢、家樂福、卡夫、嘉吉、徐福記、巴斯夫、寶馬等外企的供應商，F(xiàn)AERY現今已成為空氣分布器品的代名詞。
In 2002, Nestle Shuangcheng project used air distributor for the first time, which has been highly concerned in the Chinese market. 2006 FAERY Fairui (Chinese) in Beijing, Zhongguancun invested Beijing fabricair Technology Co. Ltd., and become the preferred supplier to foreign China tobacco, Chinese weapons, COFCO, PetroChina, Huarun group, Beijing Automotive Group and other central enterprises Nestle, Carrefour, kraft, Jia Ji, BASF, BMW, xufuji, FAERY now has become a generation noun air distributor of premium products.